www.anatol.biz riders/accca/sosolo/tecnic.php Last modified: April 24 2010 17:37:53. requested by CCBot/2.0 (http://commoncrawl.org/faq/) @ 54.162.181.75:39262


Ferloscardo - technical rider so solo

So Solo

technical rider

1. stage and set

The stage should be at least 10m wide (+ backstage and service area), 12m deep and the grid must be at least 8m high.
The stage floor must be levelled (no inclination at all) and non reflective black in all acting areas.(dance floor covering)
The backdrop should be at least 4m larger then the proscenium opening and the legs and/or other drops should be placed to create a black box preserving stage entrances on both sides down stage aligning wit the backdrop.

Our set is mainly composed by 1 cubic meter of sand divided into two sections and a structure build from scaffold pipes.
The Company will provide a protection for the sand covered areas and pads for the scaffold structure.

2. Material de iluminação

House lights must be controlled by DMX512.
We need total blackout during most of the performance, so any light source like structural openings and any other light source that might interfer with the stage lighting must be covered or dimmed during our show.

Lighting material to be supplied by the venue:

the HMI 2.5kW and the 5kW Fresnell might be replaced with other instruments according to the local conditions

the drawing below is just an example, please send us a sketch of your venue we'll try to adapt the technical specifications.

3. Som

Public Address:

4 independent sources:

Stage Sound: Process:
F.O.H. mixing desk:
the desk and its outboard should never be placed in a control room - it has to be placed within the audience

Channels List:

position

channel

description

mike / DI

stand

insert

FOH1M-Audio send 1DI (active)
FOH2M-Audio send 2DI (active)
FOH3M-Audio send 3DI (active)
FOH4M-Audio send 4DI (active)
downstage center5floor microfoneCrown PCC160
downstage center6floor microfoneCrown PCC160
downstage center7floor microfoneCrown PCC160
downstage center8floor microfoneCrown PCC160
downstage center9floor microfoneCrown PCC160
downstage right10shotgun lAT 8015high
downstage left11shotgun rAT 8015high
12
13
14
F.O.H.15CD player lline
F.O.H.16CD player rline

the M-Audio interface is provided by the company

The sound system should be set up and ready for testing at the arrival of the company.

3. Plantas e alé dos

sound layout:

in some systems this sketch might not be complete, for accurate information please refer to this file in AutoCad 3D 2004 DWG format, compressed DXF 3D or in encapsulated Postscript
depending on your connection and system this application might take up to 10 minutes to load

you need a java plug-in to be installed for this applet to work


4. Horário de trabalho




local technicians

dia

periódo

tasks

som

luz

rigging

ajudantes

1st day

morning

floor markings

1

1

1

light and sound rigging

2

4

2

afternoon

set / floor lights / sound

2

4

2

2 for loading

night

focus

3

2nd day

morning

program / sound check

1

2

afternoon

corrections

1

2

1

night

general rehearsal

1

1

1

3rd day

afternoon

corrections

1

1

1

night

performance

1

1

1

breakdown

1

2

2

2 for loading

please confirm all schedules upon the companies arrival


4. Camarins e espaços auxiliares

We will need 2 dressing rooms (at least one of them with a warm water shower) for 2 persons each.
The access to the stage and to the sound/lighting both should be as direct as possible and not accessible to the audience.
Please provide at least 1l of still mineral water for each of our crew members every of or stay.
If possible, we would like to have wired (LAN) internet access in at least one of the dressing rooms.

5. Serviços de lavandaria

After each performance we'll need to dry wash one coat, one jacket and to handwash one dress.
Please confirm on upon the companies arrival.

6. Contactos

light and technical direction:
Anatol Waschke
anatol[at]anatol[dot]biz
+351 914 937 950
www.anatol.biz

som:
Ángelo Lourenço
angelomlourenco[at]gmail[dot]com
+351 965 582 321

production and administration:
Companhia Clara Andermatt
Rua dos Caetanos, nº1, 3º
1200-078 Lisboa | Portugal
Tel +351 213 470 333
Fax +351 213 470 334
GSM +351 968 707 686
acccandermatt[at]mail[dot]telepac[dot]pt
www.clara-andermatt.com

document copyleft by Anatol Waschke